Although you can upgrade the printing experience after establishing synchronization between your computer and Brother printer in wireless mode, while making this attempt to use the Brother printer efficiently, you might encounter the error code problem of the Brother TS-02 printer. In this guide, you can find the useful information essential for solving this problem quickly and efficiently.
Read: How To Fix Brother Printer Error Code TS-05
Brother Printer Error Code TS-02 : What Is It? :
Brother TS-02 printer error code is displayed when your Brother printer MAC address is unable to recognize the WLAN hotspot or your router. In short, it is a sign that your Brother printer is not detectable by the system when you risk the process of syncing your Brother printer with your computer.
What causes Brother Printer Error Code TS-02? :
Read Before You Troubleshoot Brother TS-02 Printer Error CodeNOTE: You should be aware of what most probably causes this unique error (Brother TS-02 Printer Error Code) before you allocate your resources to troubleshoot.
- Another case when you can meet the Brother TS-02 printer error, is if your Windows system files are corrupt.
- This kind of Brother TS-02 error will most likely be observed because of corrupted entries in system files, even if they were compromised by a malicious virus.
- If your Brother printer is not fully installed for unavoidable reasons, you may reencounter this problem. This may still occur even if you have removed your Brother printer from the device.
- Additionally, the unintentional or deliberate deletion of some hardware or fabricated and registered applications from the system can cause this problem.
How to Solve Brother Printer Error TS-02? :
- Before troubleshooting, make sure that the WLAN hotspot or your Wi-Fi router is switched on.
- Now, to make sure your WLAN hotspot or router is functioning the way you would like, attempt to connect to the Internet over this wireless router.
- In this case, you have to set your Brother printer in an obstructed area beside the major internet network of the given WLAN hotspot.
- Try to execute your Brother printer application in a 1 meter or 3.3 feet coverage area of the WLAN hotspot.
- If MAC address filtering is accepted for WLAN access points or routers, please be careful to make sure that the MAC address of your Brother printer is allowed in the filter.
- After that, you will have to remember that your Brother Printer will transmit radio frequencies and signals in the 4 GHz range. And in case if your system supports 5GHz range then you might get the Brother printer TS-02 error.
- For this you need to set up the setup wizard again from the Brother control panel.
- Now enter the correct SSID and the security-related credentials to the device and then reconfirm these details.
- Once you finish this process, restart your Brother printer and check whether the Brother TS-02 error troubleshooting is successful.
