This can be extremely inconvenient as it can delay all your important print jobs. To resolve this issue, you will need to reset your printer after refilling the cartridge. Here in this article, we’ve covered everything you need to do to Reset HP Printer After Refilling Ink.
Read: How to Fix HP Printer Filter Failed Error (Resolved)
Reset HP Printer After Refilling Ink
After the cartridges are empty, they must be reloaded. Although there are some printers which work without any problem after recharge. On the other hand, some printer models require a hard reset.
The problem occurs because the printer does not recognize the newly installed cartridge. You may also see an on-screen message saying “Third Party Cartridge Detected Message” when installing a genuine HP cartridge.
When this happens, the best thing you can do to fix this problem is to reset your printer. This solution also works if you install third-party cartridges instead of genuine HP cartridges.
Tape Method
This reset method is useful when the cartridge contacts are measuring ink levels. Below are the steps on how to reset an HP printer using the tape method.
Step 1: First, you need to make sure the cartridge contacts are visible. Now flip it over and check if the contacts are on the bottom.
Step 2: Cover the contacts on the top left corner of your cartridge with tape.
Step 3: Now put the cartridge back in your HP printer and then print an alignment page. Now the printer will display a message saying “There is a problem with the cartridge”.
Step 4: Once You Have Completed the Alignment, Remove the Cartridge But Do Not Remove the Tape.
Step 5: After that, cover the contacts at the top right corner of your cartridge with adhesive tape.
Step 6: Reinsert the Cartridge, and Then Print the Alignment Page. If you see any error messages in the process, you should ignore them.
Step 7: Now remove the ink cartridge.
Step 8: Without Removing the Tape on the Top of the Cartridge, Then Stick the Bottom Left Corner.
Step 9: Next, put the cartridge back in the printer and print the alignment page one more time.
Step 10: After Printing the Alignment Page, Remove the Cartridge.
Step 11: Replace the Cartridge in Your HP Printer.
Step 12: Now put the cartridge again.
Swap Method
Another way to reset an HP printer after it’s full of ink is to use the swap method. The steps you need to follow to perform the redemption method are given below.
Step 1: Install the refilled ink cartridge in your printer.
Step 2: Now print the alignment page. If you see an error message, ignore it as it will not affect the reset process.
Step 3: Now remove the ink cartridge from your printer.
Step 4: Install One of the Older Cartridges and Try Printing an Alignment Page Using It. After that, your printer will detect a new cartridge.
Step 5: After that, remove this cartridge and install a cartridge from the old stack and try to print an alignment page using it. The printer will clear the memory of the old cartridge and recognize the newly installed cartridge.
Step 6: Insert the newly filled ink cartridge into the printer and try to print the alignment. Your printer will now be able to recognize the ink cartridge.
An HP printer is what you need to meet your everyday home and office printing needs. These devices are known for their excellent print quality. HP is known for providing the best printing products in the market for over 50 years.
The brand continues to amaze the masses with its innovative features such as fast wireless connections, fast print speeds, and high-resolution printing. However, users face problems while using HP products. One of these problems is that the printer does not recognize the reinstalled ink cartridge.
