You know, Brother printer displays some common errors, and Brother printer users are pretty familiar with that. If the error is related to hardware, firmware, software, drives, system error, network, virus and malware attacks, etc. Sometimes printer displays a Message on the LCD screen about the issue but in some cases, the error is encrypted in a code. In this article, we are going to discuss the Brother Printer ink absorber error Full which is displayed on the LCD. This means that the ink absorber must be replaced immediately. Thus, you do not get the error blinking on the screen anymore.
Read: Brother Printer Cannot Detect Ink
Do you have a Brother printer for a while now? Then you have to admit that with time the printers made by Brother Printers offer you great features. Not too long ago their printers were very famous, especially the wireless function. Almost always this is the most frequent question asked over time “How to solve Brother printer error Ink absorber full? There are things you can do to fix the problem quickly before you call a technician for more extensive service. Bringing in a technician can be expensive and take hours. But you might solve the error sooner if you try these clever “diys” do-it-yourself steps.
What is an Ink Absorber Error?
Also known as a flush box, it holds the ink dislodged during the purging of the printhead. If the machine washes or cleans it, all the ink is captured. It’s usually the case that the ink absorber lasts as long as the printer itself. Sometimes though, during use and or machine wash, the absorbent just gets overloaded with ink swells. In this case, keeping the message on the LCD will help the printer understand that it is an emergency need. Users must instantly exchange the ink absorber for a new ink absorber.
Guide to Fix Brother Printer Ink Absorber Full Error
- On initial setup, the printer will perform a “purge” where the process fills tubes with ink while installing the ink cartridges.
- The jammed paper will be cleared out by the printer before the next print. Here, it will automatically clean the print head. It is used to clean paper dust to protect the printer. Dust mites can cause serious damage to the print head.
- If you unplug the printer, when you install the cartridge, it will go straight to clean the printhead as soon as it is plugged back in.
- Replace the ink absorber with Brother printer products This extension process not only prolongs the life of the printer but also reduces downtime of the printer due to incompatible parts or parts from other manufacturers.
- Ink flood prevention reset after service reset new Epson ink absorber. When you wipe the “guts” of the printer clean, if you reset the system before reinstalling the part, you will find that drops of ink are dripping at the bottom of the printer.
So you can change the ink absorber and erase the error.
