Fix Epson ET-2760 Not Printing Color Issue – Epson printers are one of the best printers with great print quality, versatility, and not having high flow rates of ink. But what if suddenly the Epson printer is not printing color prints? If there was no color, what would happen? However, if the printer is unable to print in color the device will be useless.
Read: How To Fix Epson Printer Leaking Ink On Paper
So to answer all your questions and have knowledge about how to fix this issue, we have discussed some methods below that will help you in fixing Epson ET-2760 won’t print color. But first, let us discuss the factors that can stop the Epson ET-2760 from printing in color.
Why is My Epson ET-2760 Not Printing in Color?
So, here are some reasons that explain why there is no color issue in the Espon ET-2760 printer:
- Dust accumulation: The dust accumulation inside the printer is another reason for the Epson printer not printing colors. That’s also why it’s a good idea to always keep your printer clean.
- Nozzles are clogged: Ink will build up in the nozzles sometimes when you run simultaneously over three print cleaning cycles.
- Ink cartridge jammed: Another problem that hits the ink cartridge is the dried ink which accumulates. It is difficult to take off the sets of dry ink at times.
- It is not essential to use the printer regularly: Prevent clogging problems When you print regularly Yes if you do not print regularly, dust and negative air pressure can build up on the printer.
How to Resolve Epson ET-2760 Not Printing Color
Methods to make your printer print in color here are a few ways you can implement.
Method 1 – Inspecting The Nozzle
The steps followed in this method are:
- Using the arrow buttons, navigate to Maintenance.
- Click on the OK button.
- Then select Nozzle Check and hit the OK button.
- When the printer shows Load Letter/A4 size plain paper in the rear paper feed to begin printing, click the Print button so that a nozzle check will be printed out.
- Now make a nozzle check pattern and check if the lines are missing.
- Then print a second nozzle check to check if the print head needs cleaning.
Method 2 – Cleaning Cycle for the Printhead
This method consists of the following steps:
- First, disconnect the power supply and its essentials.
- Then set down a folded paper towel alongside the track.
- Clean your print head by sliding it right onto a paper towel.
- In the next steps, take off the printhead top cover with a screwdriver.
- Carefully lift the ink cartridges out from the side.
- Be careful not to unhook any of them.
- Then, take the syringe with the tip of the cleaning solution just above the nozzle and gently push the cleaning solution out.
- Properly seat the paper towel against the base to prevent damage.
- Do the same process with the other nozzle.
- Once Your Work Is Complete.
- And replace the ink cartridges as they were.
- So, go ahead and try the next method.
Method 3 – Run Power Clean
This method follows these steps:
- Turn off the printer.
- Simultaneously press and hold the Power and Help buttons until the Power Cleaning screen is displayed.
- When does the screen power cleanse? Then make sure ink tanks are one-third full with ink; Click OK to keep on.
- Now the power clean will start. Please do not power off the printer during this process.
- Your printer will show the message once the power cleaning process has been finished; Press OK to acknowledge.
- Print a nozzle check pattern to check if the problem is resolved.
But have you faced the Epson ET-2760 that doesn’t print out the color problem? Or is your printer now displaying another error? Call Printer Tales Contact printer experts on the following numbers: US 1-855-233-5515 For Hassle-free working printers.
