Getting stuck with Epson printer recovery mode is frustrating especially when the user has important documents to print immediately. The problem usually appears in a user’s printer when the printer driver or firmware update process is interrupted. This may be due to events such as; Accidentally turning off the printer, canceling the installation process, removing cables, etc. If you are also having trouble because your device is stuck in Epson printer recovery mode, then this article can help you.
Read: How to Force Epson Printer to Print with Low Ink?
Read: How to Fix Epson Printer not Printing After Changing Ink Cartridge?
Here we are going to discuss some simple troubleshooting steps and guidelines to fix the recovery mode issue in Epson printers. So, keep reading and find simple solutions to fix your problem.
My Epson Printer Stuck in Recovery Mode. How to Fix it?
Sometimes when you try to update their printer software or drivers, they find that their Epson printer is stuck in recovery mode. When a problem occurs, an error message appears on the user’s screen and prevents them from taking any further action until the problem is resolved. Fortunately, there are simple troubleshooting instructions that can quickly fix the problem. However, before continuing with the troubleshooting steps, you should know the possible causes of the problem.
Reasons Why Epson Printer Recovery Mode Problems
- Internet connectivity failure.
- Power failure problem.
- The installation process was interrupted.
- Accidental disconnection of cable.
These are some of the common reasons why you may not make the best use of printing services. Whenever the problem of Epson printer recovery mode occurs, it becomes quite difficult to fix the problem. So, here we are discussing some simple guidelines to fix the problem. So follow the troubleshooting steps mentioned below to resolve the issue and continue with a smooth Epson printing experience.
Epson Printer Stuck Recovery Mode Fix: Follow the Steps
Before proceeding with the Epson printer recovery mode troubleshooting steps, there are a few things that you need to consider. So, check and make sure that:
- Your internet is stable and working properly.
- All cables are properly connected to their respective places.
- Backup power for upgrade installation.
If these conditions are met, you will have no problems later. Now let’s move on to the next section and find simple solutions to fix the problem:
Update Printer Firmware
Outdated firmware might be the reason why you are stuck with Epson printer recovery mode. Therefore, you need to update the printer firmware to fix the problem. Here are the steps to follow:
- When your device shows the error “Epson printer stuck in recovery mode”, you have to wait for some time till a pop-up message appears on the screen.
- After that, you can check the official website for Epson firmware updates. All you need to do is click on the link for firmware update and it will be downloaded to your device.
- After successful download, you need to run the firmware update installer file on your system.
- Follow the on-screen instructions carefully.
When updating printer firmware by visiting Epson’s official website, you will need to provide the printer model number details to get the correct version. The downloaded file will be saved in your system’s C drive, so you can navigate to the C drive and extract the file. Once extracted, you need to double-click on the file and proceed with the installation. During the process, make sure you have a stable and active internet connection.
Update Printer Driver
Just like you updated the printer firmware, you will need to update the printer software and drivers for the Epson printer recovery mode fix. To update printer drivers, you can simply visit the official Epson printer website. On the website, you have to provide correct details about the model number of your printer. After that, you can go ahead and click on the relevant link to install the latest drivers for your device.
Check Internet Connection
If you want to print documents, you need to have a stable and active internet connection. Otherwise, you will continue to experience problems as Epson printer recovery mode stuck on your system. Therefore it is recommended that you check your internet connection and make sure that it is working properly.
To check the Internet connection, you can go to the “Start Task Manager” section. If necessary, you can restart the printer, router, modem, and computer.
Update the Network Adaptor
Updating the network adapter can also help you fix the Epson printer stuck in recovery mode problem on your device. Here are step-by-step instructions for updating a network adapter:
- On your computer, click the “Start” button.
- Go to “Device Manager”.
- Open Device Manager by clicking the Enter button.
- Here, look for the “Network Adapters” option.
- Once you find the option, right-click on it.
- Now select “Update” from the drop-down list.
That’s all! This is how you can update the network adapter. While doing this, make sure that your internet connection is active and working properly.
Still, Getting an Epson Printer Recovery Mode Error?
Follow the Steps Given Below:
- Disconnect all peripherals from your device.
- Now remove the Ethernet cable and USB cable.
- Turn off your Epson printer using the Control Panel.
- Wait at least 20 seconds.
- Turn the device back on.
Conclusion
Hopefully, now your Epson recovery mode problem is resolved. The mentioned steps are simple and easy to perform. However, if you are still stuck in printer recovery mode and unable to print documents, then there must be some other issue with your device. In such a situation, it is recommended to contact printing professionals for expert advice.
You can contact the Epson support team by dialing a toll-free number, or you can always connect with professionals by sending an email or message. The experts will get back to you with the best possible solution to the problem and ensure that your printing experience with Epson is not compromised.
